MRK-D-0034 V2.0
Aeroqual AQM 65 User Guide
Page | 48
4 Maintenance and service
Routine service and maintenance is required to ensure the AQM 65 performs optimally and to fulfil the
requirements of the Aeroqual factory warranty.
The frequency of some service activities such as filter changes will depend upon local environmental
conditions. Environments with higher particle concentrations, for example, will require more frequent
filter changes.
Other service activities such as flow checks and pump replacements can be scheduled at routine
intervals. Service activities such as module replacements are performed only when required.
Recommended service frequencies for each service activity are given in Section 4.6.
Further detail on each of the service activities can be found on the Aeroqual training website:
training.aeroqual.com
(The training website requires a login, please email
)
For some of the service activities described a video is also available on
vimeo.com
. If a video
is available, a web-link will be provided next to this symbol.
It is very important to keep service records. The Journal is used for this purpose. See Section 4.3 for
a discussion of use of the Journal for service record keeping.
4.1 Safety requirements
Replacement of any part should only be carried out by qualified personnel using only parts from the
manufacturer
Surfaces marked with a "Caution, Hot Surface" and an internationally recognised symbol may get hot
and deliver burns
If installed, the 80180 Particle Monitor is a Class 1 laser product and is not considered dangerous if
used correctly. It should not be powered up with the cover removed.