RN200 Mono Software User Manual
20
7
Safety and Warning
7.1
Precautions of device usage
1.
Please use the provided packing crate to transport the device; please exercise care when
transporting the device to avoid damage.
2.
Do not place the device in a vibrating environment as this may damage the product.
3.
Use a 110V AC power supply for the device to prevent any damage to product hardware
caused by high power pulse.
4.
Ensure proper grounding for the power supply as poor or wrong grounding may cause
damage to the product.
5.
Please keep away the device away from the electromagnetic interference environment
when using the product.
6.
Do not place the product in an environment where it may be exposed to water or other
liquids.
7.
Do not use the product in extreme heat, cold, dusty, corrosive, or high humidity
environments.
8.
When operating the device, wear static wrist straps.
9.
When the device is powered on and a fault occurs, turn off the power and inspect the
device immediately. The working site should be protected for fault analysis in the event
of a major fault.
10.
When the product is not working properly, please contact the technical support service.
Do not attempt to disassemble or repair the product in any way as you will void the
warranty. We cannot assume any responsibility for issues and problems caused by
unauthorized product modifications and/or repairs.
7.2
Precautions of personal safety
1.
Ensure proper grounding for the power supply; improper grounding may result in injury.
2.
When cleaning the device, please power off to prevent the electric shock. Wipe the
exterior surface of the device with a dry and soft rag. Do not attempt to clean the interior
of the device.
