RN200 Mono Software User Manual
11
Figure 7: Passive Test System Diagram (with Test Instrument)
Cables connection instructions:
1.
Connect both the device’s LAN port and the VNA’s LAN port to a network switch; then
connect the control PC to a network switch with an RJ45 cable.
2.
Using a USB cable, connect the device’s USB Type-B port on the interface panel with a
USB port on the control PC.
3.
Connect the DUT to the RF port on the positioner with an RF cable.
4.
Connect Port1 of the VNA to the PSV port on the interface panel, and connect Port2 of
VNA to SPDT (RF switch); the two RF output ports of SPDT have to be connected to the
H and V ports on the interface panel respectively for the passive S21 test.
Note: When using the external instruments, users must prepare the test instrument and SPDT,
and program the test software by themselves.
