Aero Easy Cover, Installation Instructions Manual

Page: 39 / 40

39
Easy Cover ®
Installation Instructions
Easy Cover ® Manual Model
Maintenance Recommendations

  

Inspect Tarp for wear and tears.
Inspect Arms for damage (cracked, dented or bent).
Bearings: Pull the shafts from side to side and in and out. If there is excessive play, replace the bearings. Apply
penetrating oil lightly as needed.
Springs: Examine springs for breakage or distortion. Apply a light coat of penetrating oil to tension springs as needed.
Fasteners: Make sure all mounting bolts and nuts are in place and tight and that no parts are worn or damaged.
Chain: Check the chain tension, that links move smoothly, and make sure the master link is on. Lubricate the chain
regularly with penetrating oil.
Electrical Connections: Check all electrical connections and tighten any that have become loose.
Safety Labels: Clean labels with soap and water. Replace if damaged and/or diffi cult to read.
Replacement Parts and instructions may be obtained from your Aero dealer or by contacting Aero Industries.

Crank handle is only used for uncovering. Remove and store crank handle when not in
use.


Uncover Unit
(Standard Crank)
Uncover Unit
(Reverse Crank)
Crank handle is only
used for uncovering.
Remove and store
crank handle when
not in use.
Cover Unit



Pull brake handle down
quickly to brake position