Aero Easy Cover, Installation Instructions Manual

Page: 38 / 40

38
Easy Cover ®
Installation Instructions
Direction switch operates depends on how it is wired.
Operation Instructions




Push to cover unit and release
when fully covered.
Push to uncover unit and release
when fully uncovered.
Aero Industries recommends a weekly inspection of the following items:
  
Replace all worn or broken parts immediately.
Repairs must ONLY be made after proper instruction.
Inspect Tarp for wear and tears.
Inspect Arms for damage (cracked, dented or bent).
Nuts & Bolts: Make sure all mounting bolts and nuts are in place and tight and that no parts are worn or damaged.
Bearings: Pull the shafts from side to side and in and out. If there is excessive play, replace the bearings. Apply
penetrating oil lightly as needed.
Springs: Examine springs for breakage or distortion. Apply a light coat of penetrating oil to tension springs as needed.
Electrical Connections: Check all electrical connections and tighten any loose connections.
Safety Labels: Clean labels with soap and water. Replace if damaged and/or diffi cult to read.
Replacement Parts and instructions may be obtained from your Aero dealer or by contacting Aero Industries.
Maintenance Recommendations
Easy Cover ® Electric Model