Aero Easy Cover, Installation Instructions Manual

Page: 10 / 40

10
Easy Cover ®
Installation Instructions
Step 2b
Installing Electric Motor and Fixed Roll Up Bar
1) See Figure 9. Fasten motor RA/SWB (1) to the end plate or tarp housing with
three 5/16-18 x 7/8 FHCS (3).
2) With screws provide with the motor attach the cover to the motor. (Cover will need to be removed for wiring.)
3)See Figure 10. When installing on a tarp housing use the motor cover (3) with
two #10 x 1 self-drilling pan head screws (5).
4) See Figure 9. Unbolt and remove the shaft from end of fi xed electric roll up bar (1).
5) One end does not have a shaft. Remove the nut and bolt from that end. Insert end onto shaft of
motor RA/SWB (1), line up hole in roll up tube with hole in motor shaft, and with previously removed nut
and bolt secure roll up bar to shaft.
6) On the opposite end line up the fi xed electric roll up bar (2) with the bearing and insert shaft through the
bearing.
  

7) Bolt the shaft using the 1/4-20 x 2 1/4 hex bolt and 1/4-20 nylon hex nut remove in step 4.
Index Description Qty
1
Motor
RA/SWB 1
2 Fixed Electric Roll Up Bar 1
3 Motor Cover 2
4 5/16-18 x 7/8 FHCS 3
5 #10 x 1 Self-drilling Pan Head 2
Figure 9
1
2
4
Motor Cover
Cover Screws
1/4-20 x 2 1/4 Hex Bolt
1/4-20 x 2 1/4 Hex Bolt
1/4-20 Nylon Hex Nut
1/4-20 Nylon Hex Nut
Figure 10
3
5