
7
18.01._5280107_02
NRL 0280-0750 °-L / A-E
EN
GENERAL WARNINGS
The units are constructed according to the recognised
technical standards and safety regulations.
They are designed for the production of chilled water
for technical installations.
Any contractual or extracontractual liability of the
Company is excluded for injury/damage to persons,
animals or objects owing to installation, regulation and
maintenance errors or improper use.
All uses not expressly indicated in this manual are
prohibited.
PRESERVATION OF THE DOCUMENTATION
1.
The instructions along with all the related
documentation must be given to the user of
the system, who assumes the responsibility to
conserve the instructions so that they are always
at hand in case of need.
2.
Read this sheet carefully; the execution of all
works must be performed by qualified staff,
according to Standards in force on this subject in
different countries. (D.M. 329/2004).
3.
The appliance warranty does not cover the costs
for ladders, scaffolding or other elevation sys-
tems, which may become necessary for carrying
out interventions under warranty.
4.
Do not modify or tamper with the heat pump
as dangerous situations can be created and the
manufacturer will not be liable for any damage
caused. The warranty shall be become null and
void if the above-mentioned indications are not
respected.
WARNINGS REGARDING SAFETY AND
INSTALLATION STANDARDS
1.
Before beginning any operation,
READ THESE
INSTRUCTIONS CAREFULLY AND CARRY OUT
THE SAFETY CHECKS TO AVOID ALL RISKS.
2.
All the staff involved must have thorough
knowledge of the operations and any dangers
that may arise at the moment in which the
installation operations are carried out.
AERMEC
will not assume any responsibility for
damage due to failure to follow these instructions.
PRODUCT IDENTIFICATION
The units can be identified through:
- PACKING LABEL
which shows the product identification data.
- TECHNICAL PLATE
TECNICAL PLATE
ATTENTION
Tampering, removal, lack of the identification
plate or anything else does not allow the sure
identification of the product and will make any
installation or maintenance operation to be
performed difficult.
Versions with Total Recovery and Condensing
Units are equipped with GR3 electronics
(standard remote panel)
All the other versions have pCO
5 electronics
(remote panel available as accessory)
1.
GENERAL WARNINGS
0280 - 0300 - 0330 L
0350 L
0280 - 0300 E
0330 - 0350 E
0500 - 0550 - 0600 - 0650 A/E
0700 A/E
0750 °/L - A/E