15
Aermec IDMKUJ. 0113.5356200_01
DMK
EN
Before starting the dehumidifier it is
necessary to carry out some prelimi-
nary operations to the condensate
collection bucket.
1.
Remove the condensate collection
bucket as shown in the figure.
2
. Push the sides of the condensate
collection bucket to unhook the two
hooks of the cover, then remove the
cover.
3
. Check there are no foreign objects in
the condensate collection bucket.
4.
Insert the cover as shown in the fig-
ure, then press the back of the cover
to lock the hooks in the holes of the
condensate collection bucket. Close
the cover.
5.
Check that the float is correctly posi-
tioned for its normal operation. If not
carefully move it until correctly posi-
tioned.
6.
Refit the condensate collection
bucket.
IF USED IN A BATHROOM ENSURE
NO WATER ENTERS THE UNIT.
The units must not be connected to a
multi-way socket and the power cable
must not pass underneath a carpet.
Do not pull the electrical cable to
remove the plug. Never disconnect the
power cable whilst the dehumidifier
is operating: this might damage the
unit's electronic circuit boards. This
dehumidifier is only for domestic use
(residences, offices, shops): any other
use is considered improper.
Do not disassemble or attempt to
repair the dehumidifier. This may only
be done by an Authorised Service
Centre.
Do not use the unit in the event of a
malfunction or if it appears damaged:
disconnect the plug and ask assistance
from an Authorised Service Centre.
Do not try to move the dehumidifier
on top of carpets or other objects.
15. IMPORTANT SAFETY INSTRUCTIONS
16. INSTALLATION