![background image](http://html.mh-extra.com/html/aerco/am-series/am-series_user-manual_2861506010.webp)
AM Series Cascade Sequencer User Manual
Page
10
of
28
AERCO International, Inc.
•
100 Oritani Dr.
•
Blauvelt, NY 10913
OMM-0101_0D
04/29/2016
Ph.: 800-526-0288
GF-146-CS
Rewiring the Master Boiler (Units without Terminals 30 & 31) –
Cont.
3. Open the wire conduit cover (See Figure 1-9).
Figure 1-9: Opening the Wire Conduit Cover
4. From the wire conduit, remove the two wires (pink and yellow) that are attached to the plug
disconnected from the communications board in step 4 (Figure 1-10).
Figure 1-10: Removing Pink and Yellow Wires from Wire Conduit
5. Cut the connector from the pink and yellow wires and strip the insulation 1/4” (7mm) (Figure
1-11).
Figure 1-11: Removing 2-Wire Connector from Junction PCB
Wire
Conduit
Cover
Wire
Conduit
Yellow & Pink
wires cut from
connector
and stripped.