A
E
R
A
A
I
R
I
N
N
O
V
A
T
I
O
N
25
4.1.2 Change Parameters
In some menus there are parameters that can be set. This is indicated by the yellow LED with flashing.
A quick blinking (2 times/s) indicates that the parameter can be changed using the present user access. A slower
blinking (1 time/s) indicates that a higher user access is required to change the parameter.
To change a parameter, first press the button. If you need a higher user access than you have to change the
parameter, a log on menu will be displayed, see below. Otherwise, a cursor will appear at the first settable value. If you
wish to change the value, do so by pressing the
and
buttons.
In numbers containing several digits you can move between the digits using
buttons.
If there are further settable values displayed the cursor will automatically move to the next one.
To pass a value without changing it, press
To abort a change and return to the initial setting, press, and hold the
button until the cursor disappears.
Collected here are a number of menus showing running mode, selected functions, alarm events and status of inputs
and outputs.
OK
