AEQ
TALENT
6
•
Stereo Headphone output
:
-
¼” stereo female jack connector.
-
Power >=100 mW
(50 mW max when using 16
Ω
headphones).
-
Compatible with low or high impedance headphones between 16 and 500
Ω
.
-
Volume control and TX/RX panorama selection from the front panel, by App and by
software.
•
Stereo ground-referenced line output
:
-
3.5mm female jack connector.
-
Output impedance
: <50
Ω
.
-
Adjustable gain from front panel, mobile app and control
software.
There is a common
input level adjustment for line input and Bluetooth incoming audio.
-
Maximum output level
: 835mV RMS (-1.5dBV) for THD <0.5%.
-
Compatible with PCs, tablets, phones and other sound recorders.
-
This output follows the audio signal sent to the outgoing Bluetooth connection.
•
Bluetooth 5.0 audio output. Stereo A2DP
:
-
Adjustable gain from front panel, mobile app and control
software.
There is a common
input level adjustment for line output and Bluetooth outgoing audio.
-
A2DP profile for high-quality audio reception (Bluetooth 5.0 with AAC encoding,
among others).
-
HFP voice profile (with G711 or G722 encoding, depending on the phone or
conferencing App used).
Communications interface:
-
IP interface: 10/100 Mbps Ethernet port, RJ45 connector.
The
default IP address
for
TALENT is
192.168.1.89
, although all devices will leave the factory with
DHCP
option
activated (configured to obtain its complete IP configuration from a DHCP server).
This interface provides access to:
Wired networks: Local area networks, Cable ADSL, Fiber and VLANs.
Satellite: an external satellite interface can be connected to the IP interface.
3G / 4G / 5G telephony: a 3G, 4G or 5G modem can be connected to the IP
interface.
Wireless data links: a "wireless bridge", WiMax or WiFi antenna can be
connected to the IP interface.
Other Features:
-
Local interface with keys and encoders.
-
Three-level LED vumeter at the front panel for program TX level indication.
-
Received audio signal presence indicator.
-
Operating temperature: -10 to +45 º C (14 to 114 º F).
-
Dimensions: Width x Depth x Height: 130x195x45mm.
-
Weight: 620gr.
-
Power supply: 5 to 15 VDC for external adapter (90-263V 50/60 Hz input) or 5V
through USB interface. Power consumption: 3.5 W max.
AEQ offers the
"
Smart
RTP
"
call initiation protocol in order to greatly simplify the
operation of the audiocodec.
AEQ also offers two SIP servers free of charge as a standard service for the users of
Phoenix ALIO. One of them is configured as main and the other is provided as a backup.
More information can be found in
Appendix B.
1.3. Available encoding algorithms.
•
OPUS
with Fs= 48 KHz, mono, stereo, with 4 mono and 3 stereo presets. Bit rates
between 12 and 192 Kbps, very low delay and audio bandwidth between 6 and 20 KHz.
•
G711
A-law, u-law (64 Kbps, low delay, 3.5 KHz audio bandwidth).
