AEQ
TALENT
13
3.4.
"
HELP
"
Key.
This key sends a notification to the remote control software provided that this is in use. This
way, a TALENT user that requires assistance or has doubts can ask the operator that is
remotely controlling or monitoring the unit with the "AEQ ControlPHOENIX" software for help.
When the "HELP" key is pressed, the key will start to flash in red. On the remote control
software a pop-up notification will appear asking the operator to get in touch with the TALENT
user.
Once this notification is confirmed by the remote operator (by clicking on the "OK" button), the
TALENT’s "HELP" key will stop flashing.
The notification can be cancelled at any moment by pressing the "HELP" key again.
On the other hand, a long-pressing of the "HELP" button alternatively turns on or off the
Bluetooth module integrated into the unit.
3.5. Microphone and Panorama encoder.
If this encoder is turned, the microphone input gain is controlled.
A brief pressing on the encoder push-button will illuminate the associated
yellow
LED,
indicating that, when turning the encoder, adjustment now acts on the TX/RX
panorama for the outputs currently listening to the PROGRAM bus. 3 seconds after the
last adjustment of the knob the yellow LED will extinguish and the encoder returns to normal
(microphone gain) adjustment mode.
Pressing the encoder push-button for a while acts on the line / Bluetooth input ON AIR
setting, and, when ON, the associated LED illuminates
red
. Pressing it again for a
while turns off the LED and stops sending this input to program. In both situations, the
encoder knob rotation still works as described above.
Line input / Bluetooth level adjustment can be performed from "AEQ ControlPHOENIX" control
software.
3.6. Headphone and output line / Bluetooth Encoder.
The headphone output level is adjusted when turning this encoder knob.
A brief pressing on the encoder push-button will illuminate the associated
yellow
LED,
indicating that, when turning the encoder, adjustment now acts on line / Bluetooth
output level. 3 seconds after the last adjustment of the knob the yellow LED will
extinguish and the encoder returns to normal (headphone volume) adjustment mode.
Pressing the encoder push-button for a while acts on the activation of the local
microphone sending to the line / Bluetooth output, and, when ON, the associated LED
illuminates
red
. In both situations, the encoder knob rotation still works as described
above.
D
E
F
