AEQ TALENT, User Manual

Page: 59 / 80

AEQ TALENT
59
8. TECHNICAL SPECIFICATIONS *
Audio inputs and outputs
Dynamic or condenser MIC inputs Female XLR-3 connector . I nput impedance : 2 K Ω .
Valid for most microphones with nominal 48V
Phantom
. High quality, low noise, electronically
balanced preamplifier
Stereo analogue line input 3.5mm female jack. Input impedance > 15 K Ω .
Bluetooth audio input A2DP profile for high-quality audio reception
(Bluetooth 5.0 with AAC encoding, among others).
HFP voice profile (with G711 or G722 encoding,
depending on the App used).
Stereo analogue line output 3.5mm female jack. Output impedance: < 50 Ω
Headphone output: ¼” stereo female jack. For low or high impedance
headphones, between 16 and 500
Ω
.
Bluetooth output A2DP profile for high-quality audio reception
(Bluetooth 5.0 with AAC encoding, among others).
HFP voice profile (with G711 or G722 encoding,
depending on the App used).
Audio characteristics
Max output line level 835 mV. RMS (-1.5dBV),THD <0.5%
Max input line level 1 V RMS (0dBV)
Distortion < 0.011 % on the way MIC → Line Out or MIC → HP
(Vin=-35dBu, Gin=33dB, Gout=0dB, BW=22kHz)
Dynamic range > 87 dB on the way MIC → Line Out or MIC → HP
(Vin=-35dBu, Gin=33dB, Gout=0dB, BW=22kHz)
Binary rate 12 to 2304 Kbps
Operating modes Mono, Stereo, Dual, JStereo, MS Stereo
Frequency response +/-0.5 dB @ 20 Hz-20 KHz
A/D & D/A conversion
Analogue I/O: A/D & D/A converter 24 bit Sigma-Delta 48 KHz
Communications interfaces
IP interface Ethernet RJ45 10/100Mbps port
Coding algorithms
OPUS, G.711, G.722, MPEG Layer 2, PCM…
(See APPENDIX A)
Control and data interface
LAN 10 / 100 base T RJ45 connector
General characteristics
Power supply 5 to 15 VDC for external adapter (90-263 V 50/60 Hz
input) or 5V through USB interface.
Power consumption: 3.5 W. max.
Operating temperature -10 to +45 º C (14 to 114 º F)
Weight 620 grs.
Dimensions Width x Depth x Height: 130x195x45 mm.
* Characteristics are subject to changes without previous notice.
Safety regulations
CE Marking.
Electromagnetic compatibility according to EU directives EN 50081-1, EN 50052-2.