AEQ
TALENT
75
APPENDIX E: TALENT Troubleshooting guide.
E1. TALENT unit won’t turn on or the blue power indicator blinks.
If there is no light at the unit’s top blue indicator, please make sure that the connected
power supply is properly selected using the rear "POWER SWITCH" (DC-IN
→
switch in
/ USB power
→
switch out) and that the selected power source
actually provides proper voltage (5V at USB or 5-15V at DC IN).
In case that you are supplying power to the TALENT using a USB cable, a blinking blue power
LED means that the power source in use is not able to provide enough current (this may
happen with certain laptops or small phone chargers), so you should select another power
supply method.
We always recommend the usage of the supplied AC/DC adapter, when possible.
E2. I cannot control TALENT from
"
AEQ TALENT PILOT
"
App.
Make sure that TALENT is not yet controlled by another smart device. Turn Bluetooth on in your
phone and check that, after a few seconds, the following devices are found:
•
"AEQ_TALENT_<serial number>"
•
"AEQ_TALENT_BLE_<serial number>"
this second device is the one used for
control App.
Once you have checked that your phone has found both devices, close "AEQ TALENT PILOT"
App and open it again after a few seconds, or touch the bottom Refresh red button. Your
TALENT should then appear in the list:
so after touching on its name, you should be able to control it (in order to verify that, once in the
main screen touch the ON AIR button, for example, and check that changes are made in
parallel in the screen and on the actual unit).
