2021. 05. 04.
Custom automation - Smart Home Hub : Aeotec Help Desk
https://aeotec.freshdesk.com/support/solutions/articles/6000240462
1/4
Custom automation - Smart Home Hub
Modified on: Sat, 27 Mar, 2021 at 7:04 PM
This solution shows you how to create, edit, and delete custom automation using
(https://aeotec.com/smartthings/)
with SmartThings Connect app. It forms part of a broader guide on managing and using
Smart Home Hub which can be found
(https://aeotec.freshdesk.com/a/solutions/articles/6000240160)
a.
Add a new custom automation
In the Smart Home Hub app, you can build custom automation to automatically trigger multiple actions, including
notification alerts. You can set up automation to run at certain times on certain days of the week or to trigger when
another device reports a certain condition (such as detecting motion).
Steps in app
1. From the Home screen, tap
Plus (+) icon
and select
Automation
2. Tap
Plus (+)
icon to add a Condition
Tap
Based on the time of day
to select a specific time or period for the Automation to run
Tap
Specific time
to select a single specific time and the days of the week
Tap
Period of time
to select a time window with a specific start date and end date, or the days of the
week
Tap
Sunrise
or
Sunset
to use your Location's geolocation settings to trigger at sunrise or sunset.
(Optional: Set a time offset of up to 60 minutes before or after sunrise or sunset)
Tap
Based on a device status
and the app will prompt you to choose:
A device
The device capability to use (e.g., motion, open/close, temperature)
The device state to use (e.g., no motion vs. motion, open vs. closed)
Tap
Based on a member's location
to trigger an Automation when your phone arrives or departs from your
(https://support.smartthings.com/hc/articles/115002084986)
configuring your geolocation.
Tap
Based on this location's mode
to trigger the Automation only when the Location's mode is set to
Away, Night, or Home
Tap
Based on security mode
to trigger the Automation only when Smart Home Monitor's security state is
(https://support.smartthings.com/hc/articles/205380154)
(https://aeotec.freshdesk.com/a/solutions/articles/6000240463)
to learn more about Smart Home Monitor
in the Smart Home Hub app
If multiple Device status, Location mode, or Security mode conditions are selected:
Tap
All conditions
for all conditions to be met before triggering the automation
Tap
Any condition
to require that only some conditions are met before triggering the automation
3. Tap
Next
4. Tap
Plus (+)
icon to add an Action
Tap
Notify members
to create a notification for when the Automation runs
Select the device(s) to control
Select the device action (e.g., on, off, dimmer level)
