DM482e User Manual
AEMULUS
18
7
Channel 0 control panel:
a
Start
Execute the operation
b
Command
The command to be sent to module for different
MIPI operation
c
Select Feature
Select either DM482e_MIPI_RFFE_WR,
DM482e_MIPI_RFFE_RD and
DM482e_MIPI_RFFE_RETRIEVE
d
Reset
Reset all ports to input, drive logic low. Reset all
internal registers
8
Channel 1 control panel:
a
Start
Execute the operation
b
Command
The command to be sent to module for different
MIPI operation
c
Select Feature
Select either DM482e_MIPI_RFFE_WR,
DM482e_MIPI_RFFE_RD and
DM482e_MIPI_RFFE_RETRIEVE
d
Reset
Reset all ports to input, drive logic low. Reset all
internal registers
9
Display the data after read operation, together with its corresponding parity check
bit.
10
Counter to display the number of data byte read
Table 5: MIPI Soft Front Panel Control
Note:
1.
Loop-back – is an operation whereby the routing of signals or flows of items back to
their originating devices or facilities without intentional processing or modification.
This is used to test the transmission or transportation infrastructure.
