DM482e User Manual
AEMULUS
19
Quick steps to configure the module:
1.
Select PXIe address of the targeted module from the drop-down list.
2.
Set the desired voltage level.
3.
Set the desired frequency.
4.
Press “Initialize”.
5.
Set desired operation from the feature in channel 0 or channel 1. For example,
DM482e_MIPI_RFFE_WR.
6.
Set the desired operation command, for example, 0x0202.
7.
Set the data that should be written to the module at part (6). Refer to Figure 4.
8.
Press “Start” to execute the command.
9.
Press “Un-Initialize” to turn off the whole module.
Note:
Retrieve
result
and
counter
will
be
displayed
after
the
operation
of
DM482e_MIPI_RFFE_RETRIEVE.
