DM482e User Manual
AEMULUS
16
Quick steps to configure the module:
1.
Select PXIe address of the targeted module from the drop-down list.
2.
Select the targeted pin group. In this example, select “All Groups (PIN0-11)”.
3.
Press “Initialize”.
4.
The module is set to drive 1V and its current compliance is set to 25mA, in DVCI
mode.
5.
Press “Start” to execute the commands. The button will immediate to “Stop”.
6.
Both voltage and current are measured.
7.
Press “Stop” to exit from PMU mode.
8.
Press “Un-Initialize” to turn off the whole module.
Figure 3: PMU Operation
