14
Simple Logger
®
Models L320 / L410 / L430
• Once the scale is defined, click in the
Units
box to program the
engineering units to be displayed on the graph. Up to 5 alphanumeric
characters may be typed in this box (e.g. PSIG or GPM, etc.).
• After all the data is entered and you are satisfied with the template,
click on
File
at the top left side of the dialog box window.
• Choose one of the available options:
-
Open:
Retrieves a previously stored template.
-
Save:
Saves the current template you just created for future use.
-
Print:
Prints a copy of the scale and unit programming window as
seen on the screen.
4.3.3 Creating Scales for Connected Loggers
• Connect the Simple Logger
®
to the computer’s serial port for download-
ing. See main manual for downloading instructions.
• Once the proper port is selected, data will appear in the update box
at the top
right hand side of the screen. This is an indication that the
software has made connection to the logger. The
Scale
command will
also appear on the task bar if the logger detected allows scale and
engineering unit programming.
• A screen similar to Figure 5 will appear. The left side of the screen pro-
vides the scale and unit programming, while the right side displays the
profile of the programmed scale in relationship to the actual input to the
logger.
Figure 5
