Simple Logger
®
Models L320 / L410 / L430
7
2.1
Indicators and Buttons
The Simple Logger
®
has one button and one indicator. Both are located
on the front panel. The PRESS button is used to start and stop recordings
and to turn the logger on and off.
The Red LED indicates the status of the logger:
•
Single Blink:
STAND-BY mode
•
Double Blink:
RECORD mode
•
Continuously On:
OVERLOAD condition
•
No Blinks:
OFF mode
2.2
Inputs and Outputs
The left side of the Simple Logger
®
incorporates 4mm safety banana
jacks for the Models L410 and L430 and a screw connector for the Model
L320.
The right side of the logger has a female 9-pin “D” shell serial connector
used for data transmission from the logger to your computer.
2.3
Mounting
Your Simple Logger
®
is equipped with clearance holes in the base plate
tabs for mounting. For less permanent mounting, the Velcro
®
pads (sup-
plied loose) can be attached to the logger and the surface to which the
logger will be mounted.
