50
Power Quality Analyzer Model 3945
5.6.2 Selecting or Deleting a Record
07/25/02 10:56
100%
SELECTION OF RECORDING
TEST
07/25/02 17:58
> In progress
PUMP
07/18/02 17:58
> 07/18/02 11:45
MOTORA
07/12/02 14:41
> 07/12/02 16:40
Figure 5-20
The status bar at the top displays the memory occupied by previous records.
To Select a Recording:
• Press the
buttons to select the recording. The current selection will
appear in bold type. Press the
button to accept the selection.
To Delete a Recording:
• Select the record to be deleted with the
buttons, press on
button
and then press the
button to delete the selection.
Tip!:
It is possible to display a measurement being recorded by selecting
the name of the recording. To refresh the screen, press the mode buttons
(caution: loss of cursor position and zoom capability will occur).
The instrument automatically makes a correction if the programmed dates and
times do not match any of the following:
- the current date
- the current time
- the set storage rate
It is recommended to set multiple times:
- of 2 for 2 min
- of 5 for 5 min
NOTE:
The instrument automatically corrects the start and end time in order to improve
the readability of the time scales of the recording mode (graph representation).
