Megohmmeter Models 5000N/5100/5110
- 26 -
Audible Signal
When the push-to-test button is in the ON or LOCK-IN position, an
audible signal will result. This signal consists of approximately one beep
every six seconds (ten beeps per minute). The signal can be used as a
time base for monitoring the duration of the test. On the M
Ω
and G
Ω
ranges, the signal indicates that the instrument is in operation and that
the selected DC test voltage may be present on the terminals of the
instrument.
Note:
On the Models 5100 and 5110, the audible signal may be
disconnected by means of a jumper located on the main circuit board.
Connector to
battery board
ON
OFF
Figure 11
Summary of Contents for 5000N
Page 2: ......
