Current Probes & Sensors for Power Quality Meters
17
5. MAINTENANCE
Use only factory specified replacement parts. AEMC
®
will not be held responsible
for any accident, incident, or malfunction following a repair done other than by its
service center or by an approved repair center.
CAUTION:
Risk of electric shock. Disconnect the instrument from any source of
electricity.
5.1 Cleaning
■
Use a soft cloth, dampened with soapy water. Rinse with a damp cloth
and dry rapidly with a dry cloth.
■
Do not use alcohol, solvents, or hydrocarbons.
■
Do not splash water directly on the instrument.
5.2 Battery Replacement
5.2.1 Model MR193
■
Disconnect the MR193 completely and turn the rotary switch to OFF.
■
Use a screwdriver to unscrew the screws and remove the battery
compartment cover on the backside of the unit.
■
Withdraw the battery from its compartment.
■
Disconnect the old battery without pulling on the wires and replace with
a new one, observing the polarity.
■
Put the battery into its compartment.
■
Put the cover back in place and screw the screws back in.
5.2.2 Model SL261
■
Disconnect the SL261 completely and turn the rotary switch to OFF.
■ Unscrew the battery compartment screw and pull off the battery
compartment cover.
■
Replace the battery with a new one, observing the polarity.
■
Put the cover back in place and screw the screw back in.
www.calcert.com
1.888.610.7664
0
5
10
15
20
25
30
