Current Probes & Sensors for Power Quality Meters
13
For Probes:
■
Press the jaw opening lever on the probe to open the jaws.
■
Clamp the probe around the conductor to be tested. For best results, center the
conductor in the jaws of the clamp.
I
For AmpFlex
®
and MiniFlex
®
Sensors:
■
AmpFlex
®
: Press simultaneously on both sides of the opening connector.
■
MiniFlex
®
: Press the opening device to open the flexible sensor.
■
Clamp the sensor around the conductor to be tested. For best results, center the
conductor in the jaws of the clamp.
■
Close the sensor by pushing the moving part into the connector until it clicks.
NOTE:
For details of the measurement configuration and technical specifications,
refer to the user manual of the instrument the current probe is being used with.
www.calcert.com
1.888.610.7664
0
5
10
15
20
25
30
