manualshive.com logo in svg

AEM TESTPRO CV100, User Manual, Page: 9 / 47

Share
Download
AEM TESTPRO CV100 User Manual Download Page 9

9

 

WWW.AEM-TEST.COM

[email protected]   |   Version # : 2.2

TestPro CV100

User Manual

The [License Details] section displays the current license 
installed in your TestPro. To check the license, go to 
Settings>License Details.

• 

A screen showing the serial numbers of the main and remote 
units, the expiry date of the license and the license type. If this 
information is empty, it means there is no license installed in 
the device.
Email 

[email protected]

 to check the licenses 

available for your TestPro.

To update a license from a USB, follow these steps:

Save  testpro.lic  to  the  USB  flash  drive  >  Power  on 
TestPro and insert the USB flash drive > Select [Copy 
License].
A  [License  successfully  updated]  window  will  confirm 
that the license has been updated. Select close to exit 
the window.
Check the license info in [License Details].

• 

• 

• 

Another way to update the license 

Save testpro.lic to the USB flash drive
Go to Settings > License Details > Update License (USB)
A  [License  successfully  updated]  window  will  confirm 
that the license has been updated. Select close to exit 
the window.

• 

• 

• 

l. Device Specifications

Click [Settings] on the home screen, then [Device]. 

• 

m. Unit Type

To determine if TestPro need a license to perform copper 
certification tests, go to Main Menu>Settings>Device.
TestPro with serial numbers beginning with 4 (i.e. 4200-
0000) require a certification license.

Click [Settings] on the home screen, then [Device].
Click [Unit Type]. 

• 

• 

Summary of Contents for TESTPRO CV100
















































Reviews:

No comments