manualshive.com logo in svg

AEM TESTPRO CV100, User Manual, Page: 44 / 47

Share
Download
AEM TESTPRO CV100 User Manual Download Page 44

4 4

 

WWW.AEM-TEST.COM

[email protected]   |   Version # : 2.2

TestPro CV100

User Manual

[Copy Test Result to USB] will export all the test results saved 
inside the device to the USB flash drive.

a. Transfering Test Results from TestPro

• 

•   

•   

Example: 3 projects saved in TestPro.
Insert a USB flash drive to the TestPro USB port and 
select [Copy Test Results to USB].
Choose the project(s) that needed to be exported and 
click Yes. 
A  dialog  box  will  confirm  the  number  of  test  results 
exported to the USB flash drive.

•   

TestDataPro is a test result management software allowing 
the user to transfer test results from a TestPro unit to a PC or 
laptop & then manage them according to project, building, 
floor,  rooms,  racks  and/or  panels.  Users  can  also  use 
TestDataPro to view the results or to generate PDF reports.

b. TestDataPro Test Management Software

Visit 

www.aem.test.com/myaccount 

to download 

TestDataPro. Install the TestDataPro software and refer to 
the TestDataPro user guide. The procedures for importing 
data into TestDataPro and generating test reports are also 
illustrated in the following pages:

•   

Select [New] on the top left corner or [Create] to create 
a new project.

•   

After a new Test Project is created, select either [From 
File] - to import test results from any location in the PC 
or [From USB] - to import test results directly from USB 
flash drive or [From Device] - to retrieve test results from 
the TestPro unit.

•   

Browse to the test result folder (i.e USB flash drive), select 
the tpd file and click [Open].

Summary of Contents for TESTPRO CV100
















































Reviews:

No comments