manualshive.com logo in svg

AEM TESTPRO CV100, User Manual, Page: 39 / 47

Share
Download
AEM TESTPRO CV100 User Manual Download Page 39

3 9

 

WWW.AEM-TEST.COM

[email protected]   |   Version # : 2.2

TestPro CV100

User Manual

TestPro’s Switch Detail feature helps network professionals 
identify the switch name and model number to which 
the TestPro is connected to. Information such as port 
number, VLAN ID, IP address and much more are also 
readily available, eliminating the need to manually 
trace network cables, saving users time and effort when 
troubleshooting network related issues.

v. Switch Detail

• 

• 

•   

To initiate Switch Detail, select [Tools].
Select [Switch Detail].
Key in the appropriate value for [Switch Query TimeOut] 
(default is set to 30 seconds). Increase the timeout when 
the tester fails to detect the switch information. Select 
the protocol to be used - [CDP], [LLDP] or both. Select 
[Start Test].

• 

• 

Switch Detail commences.
Once the Switch Detail process is complete, the results 
will be displayed.

TestPro can open a TCP connection with the selected 
target to test for port availability, by doing a TCP Connect 
test, using a 3-way handshake (SYN, SYN/ACK, ACK). The 
Autotest will run three times before reporting the results.

vi. TCP Connect

• 

• 

•   

Select [Tools].
Select [TCP Connect].
On the TCP Connect screen, key in the desired URL or 
IP  address  to  be  tested  in  the  [Domain  Name]  field. 
Specify the port to be used and the timeout period.

Summary of Contents for TESTPRO CV100
















































Reviews:

No comments