manualshive.com logo in svg

AEM TESTPRO CV100, User Manual, Page: 5 / 47

Share
Download
AEM TESTPRO CV100 User Manual Download Page 5

5

 

WWW.AEM-TEST.COM

[email protected]   |   Version # : 2.2

TestPro CV100

User Manual

STATUS LED

MICRO USB INPUT

USB TYPE A

RJ4510/100/1G

DC INPUT

TEST ADAPTER

STAND

5.

6.

7.

8.

9.

10.

11.

Red : battery charging (when unit is off)
Amber : battery charging (when unit is on)
Green : battery not charging (when unit is on)

Establishes a USB-based wired link between the TestPro CV100 unit and a personal computer.
Test results can be transferred to PC software (TestDataPro) via this connection.

USB flash drive connection to store test results and for software updates.

For validation testing of cables up to 1G 
(functionality is built into the basic TestPro CV100 kit).

Connection for 5V DC supply (WARNING : Do not connect to any power supply other than 
the power adapter supplied by AEM).

A variety of plug and play adapters can be used to change the function of the TestPro CV100 
modular platform.

Retract stand to place it on a table or any other flat surface, freeing you to perform other 
tasks while keeping an eye on the screen.

• 

• 

•   

•   

 

•   

•   

 

•   

 

•   

 

•   

Summary of Contents for TESTPRO CV100
















































Reviews:

No comments