AEG EDW1103, Service Manual, Page: 19 / 59

SOE/PR 19 599 72 48-93
Phase Duration
Water fill, Turbo activation 30’’
Washing continuously, dispenser
opening
45’’
Drain dilution
Water fill ---
Washing continuously 60’’
Drain dilution
Water fill ---
Controlled washing at 2600 rpm,
heating at 60 °C
Controlled washing at 2600 rpm,
temperature kept at 60 °C
1200’’
7.2.3 Functional test cycle
7.2.3.1 Cycle setting
1. Hold down the PROGRAMMES button
2. Turn the appliance on at the ON/OFF button
� LED L1 flashes
� LEDs L2 and L3 are turned on
4. Press the PROGRAMMES button twice before LEDs L2 and L3 are turned off
� LED L3 flashes
� LEDs L1 and L2 are turned on
5. Wait for LEDs L1 and L2 to be turned off
6. Press the PROGRAMMES button to start the test cycle
� LED L4 is turned off
� LED
L2
flashes for the duration of the cycle
7.2.3.2 Cycle phases
temperature
time
N.B. : a t the beginning of the next programme after the test cycle, the resins are washed. The overall duration
of the cycle is approximately 50 minutes.
7.2.4 Reading alarms and activating components
Once in Service mode, the reading of alarms and the activation of individual components is possible using
button S1. After the last component in the list has been activated, the sequence will be repeated.
The sequence is defined as follows:
1. Alarm 1
2. Alarm 2
3. Alarm 3
4. Regenerating solenoid valve
5. Drain pump
6. Fill solenoid valve
7. Heating element (if the level of water is reached)
8. Washing pump (at 2800 rpm)
9. Detergent dispenser
10. Drying fan
If a display is available, the activated component is indicated by its own number in the list (starting with
number 4).