AEG EDW1103, Service Manual, Page: 15 / 59

SOE/PR 15 599 72 48-93
6.3 Disable/Enable Rinse Aid
This function allows you to disable the rinse aid dosing.
In appliances with a 3-digit display, once you have entered the User mode, press button S2 to display the
current status where “0d” indicates it is disabled and “1d” that it is enabled.
To modify the enabled/disabled status, press button S2.
The new setting is then displayed.
6.4 Disable/Enable Buzzer
This function allows you to disable the cycle end buzzer.
In appliances with a 3-digit display, once you have entered the User mode, press button S3 to display the
current status where “0b” indicates it is disabled and “1b” that it is enabled.
To modify the enabled/disabled status, press button S3.
The new setting is then displayed.
6.4.1 EDW503
Hold down the programmes button
LED L1 flashes and L2 is turned on permanently
Release the button and press it again: LED L1 is lit permanently and L2 flashes
After a few seconds, LED L1 is turned off and L2 flashes;
the CYCLE END LED will indicate whether the buzzer is enabled.
To enable or disable the BUZZER, press the programmes button (cycle end on = buzzer enabled).