AEG COMPETENCE CB8920-1, Installation And Operating Instructions Manual

Page: 72 / 80

72
What to do if ...
If you are unable to remedy the fault by following the above sug-
gestions, please contact your specialist dealer or Service Force
Centre.
1
Warning: Repairs to the appliance should only be carried out by ap-
proved service engineers. Repairs carried out by inexperienced persons
may cause serious injury to the user.
If the appliance has been used incorrectly, the customer service engi-
neer's visit or that of the specialist dealer will not be made free of
charge, even during the warranty period.
3
Advice on cookers with metal fronts:
Because of the cold surface at the front of the cooker, opening the
oven door during (or just after) baking or roasting may cause the
glass to steam up.
Fault Possible cause Remedy
The oven does not heat up. The oven has not been
switched on.
Switch the oven on.
The correct time has not
been set. Set the correct time.
The required settings have
not been made. Check the settings.
The oven safety cut-out
has been triggered. See Oven Safety Cut-out.
The fuse in the domestic
wiring system (fuse box)
has been tripped. Check the fuse.
If the fuses are repeatedly
tripped, please call a quali-
fied electrician.
"F 9“ appears in the display. Press the mains power
button
.
The oven is not heating up,
but the function display is
operating. A small arrow
will light up. Set the oven function to
ZERO. Do not switch off
the oven.
Press and hold down the
three buttons PRO-
GRAMME, MEAT PROBE
and
at the same time,
until a signal can be heard.
The oven light does not
come on. The bulb in the oven has
blown. Replace the oven bulb.