www.aegaustralia.com.au | www.aegnewzealand.co.nz
4
2. CONDITIONS OF USE
This appliance is intended to be used inhousehold and similar applications such as:
• Farm houses
• By clients in serviced apartments, holiday apartments and other residential type
environments.
• Staff kitchen areas in shops, offices and other working environments, Bed and
breakfast type environments
3. SAFETY INSTRUCTIONS
3.1 Installation
WARNING!
Only a qualified person must install this appliance and carry
out servicing. (Certificate of Compliance to be retained)
• Remove all the packaging
• Do not install or use a damaged appliance.
• Follow the installation instruction supplied with the appliance.
• Always take care when moving the appliance as it is heavy. Always use safety
gloves and enclosed footwear.
CAUTION!
Avoid sharp edges during handling.
• Do not pull the appliance by the handle.
• Keep the minimum distance from the other appliances and units.
• Make sure that the appliance is installed below and adjacent safe structures.
• Where the appliance is built into a cabinet, the cabinet material must be capable
of withstanding 70°C. If adjacent to vinyl-wrapped surfaces, use installation kit
from vinyl wrap supplier.
• The sides of the appliance must stay adjacent to appliances or to units with the
same height.
• The appliance is equipped with an electric cooling system. It must be operated
with the electric power supply.
WARNING!
The appliance and its accessible parts become hot during use.
Care should be taken to avoid touching heating elements.
Children shall be kept away unless continuously supervised.
• Always use oven gloves to remove or put in accessories or ovenware.
• Before carrying out any maintenance, disconnect the appliance from the power supply.
• Ensure that the appliance is switched off before replacing the lamp to avoid the
possibility of electric shock.
• Do not use a steam cleaner to clean the appliance.
• Do not use harsh abrasive cleaners or sharp metal scrapers to clean the glass
door since they can scratch the surface, which may result in shattering of the glass.
• Excessive spillage must be removed before the pyrolytic cleaning. Remove all
parts from the oven.
• To remove the shelf supports first pull the front of the shelf support and then the
rear end away from the side walls. Install the shelf supports in the opposite sequence.
• The means for disconnection must be incorporated in the fixed wiring in accordance
with the wiring rules.
• Use only the food sensor (core temperature sensor) recommended for this appliance.
