51
ENGLISH
Technical data
Receiver
Dimensions (W x D x H)
220 x 170 x 41 mm
Weight (without packaging) 0.82 kg
Operating temperature
0 °C to +40 °C
Storage temperature
–40 °C to +65 °C
System
Corresponds to DVB standard
Tuner input
Jack
F socket (75
Ω
)
Frequency range
950 ~ 2150 MHz
Level range
-65 ~ 25 dBm
Demodulation
QPSK/8PSK
Teletext
Corresponds to DVB
STB (normal TV) / VBI
standard
MPEG audio (MPEG 1 layer 1 and 2)
Typ Mono,
stereo
Remote control
Range
Up to 5 m
Mains adapter
Current consumption
Max. 18 W
Mains voltage
100 – 240 V AC
50–60 Hz
Connections
Digital audio output
1 x RCA cinch coaxial
Video output
1 x RCA Cinch CVBS
Audio output
2 x RCA R/L
Tuner input
F socket
Tuner loop-out
F socket
SCART
RGB, CVBS, Audio
USB
2.0
HDMI
576p, 576i, 720p,
1080i resolution
This device has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest
safety regulations.
Subject to technical changes without prior notice!
If a malfunction still cannot be rectified, please
contact your specialist dealer or the manufacturer.
Troubleshooting
Symptom
Possible cause and remedy
The view in the display
does not light up.
No sound and no picture,
control lamp on the
receiver is on.
No sound or picture.
The TV set does
not show a picture.
Poor picture,
locking error
The remote control
does not function.
The power cable is not connected.
Connect the power cable to the mains socket.
The receiver is in standby mode.
Press the "
" key. The receiver switches on and the
channel is shown on the TV screen.
The receiver is in VCR mode.
Press the DTV/VCR button.
Wrong picture format setting.
Press the green button repeatedly to choose the correct setting.
No signal or a weak signal only.
Check the cable connection to the receiver and from the receiver to the
connected devices.
Align the antenna.
The system is not connected correctly.
Check the SCART or HF cable's connection.
The TV set is not in AV mode.
Switch the TV set to the relevant AV input.
The antenna is not aligned correctly.
Align the antenna.
The batteries are spent.
Replace the batteries with new ones.
The remote control is not being pointed properly.
Point the remote control at the front of the receiver and make sure that nothing
is positioned between the remote control and the receiver.
I
AEG_BDA_DVB-S2_4546_GB.qxd:CL_BDA_DVB_T776_GB_ka.qxd 22.01.2010 11:34 Uhr Seite 51
