AEG 25658G-M, Instructions For Use, Installation And Maintenance

Page: 15 / 28

15
CONVERSIONS
13) REPLACING THE INJECTORS
The burners can be adapted to different types of
gas by mounting injectors suited to the type of gas
in question. To do this, first remove the burner tops
using a wrench “B”. Now unscrew injector “A” (see
fig. 16) and fit a injector corresponding to the utilized
type of gas in its place.
It is advisable to strongly tighten the injector in
place.
After the injectors have been replaced, the
burners must be regulated as explained in
paragraphs 10. The technician must reset any
seals on the regulating or pre-regulating devices.
The envelope with the injectors and the labels
can be included in the kit, or at disposal to the
authorized customer Service Centre.
For the sake of convenience, the nominal rate table
also lists the heat inputs of the burners, the
diameter of the injectors and the working pressures
of the various types of gas.
BURNER ARRANGEMENT ON THE HOT PLATE
LPG 28 - 30 218 88 750 3000 41
1 RAPID LPG 37 214 88 750 3000 41
NATURAL 20 286 115 Y 750 3000 41
LPG 28 - 30 127 68 500 1750 32
2 SEMIRAPID LPG 37 125 68 500 1750 32
NATURAL 20 167 98 Z 500 1750 32
LPG 28 - 30 73 50 400 1000 30
3 AUXILIARY LPG 37 71 50 400 1000 30
NATURAL 20 95 72 X 400 1000 30
LPG 28 - 30 244 93 1400 3350 62
4 ULTRA RAPID LPG 37 239 93 1400 3350 62
NATURAL 20 319 124 Y 1400 3350 62
OTHER MARKETS
BURNERS
N° DESCRIPTION
GAS
NORMAL
PRESSURE
NORMAL
RATE
INJECTOR
DIAMETER
NOMINAL
HEAT INPUT (W)
mbar g/h l/h 1/100 mm Min. Max. 1/100 mm
FIG. 16
BY PASS