AEG 25658G-M Instructions For Use, Installation And Maintenance Download Page 27 | Manualshive

Page: 27 / 28

background image

Before leaving the factory, this appliance will have been tested and regulated by expert and specialized
personnel in order to guarantee the best performances.
Any repairs or adjustments which may be subsequently required may only be carried out by qualified
personnel with the utmost care and attention.
For this reason, always contact your Dealer or our nearest After Sales Service Center whenever repairs
or adjustments are required, specifying the type of fault and the model of the appliance in your
possession.
Please also note that genuine spare parts are only available from our After Sales Service Centers and
authorized retail outlets.
The above data are printed on the data label put on the inferior part of the appliance and on the packing
label.
The above informations give to the technical assistant the possibility to get fit spare parts and a heaven-
sent intervention. We suggest to fill the table below.

MARK: ........................................................................

MODEL: ......................................................................

SERIES: ......................................................................

TECHNICAL ASSISTANCE AND SPARE PARTS

27

«
...
25
26
27
28
»

Summary of Contents for 25658G-M





























Reviews:

No comments

Related manuals for 25658G-M

Brand: Taurus Pages: 48

1PBF036TK00 Series

Brand: Barazza Pages: 24

Brand: Dacor Pages: 68

Brand: Smeg Pages: 29

Brand: Freggia Pages: 64

Brand: Kuppersbusch Pages: 12

Brand: VOX electronics Pages: 170

Brand: Bertazzoni Pages: 25

Brand: Frigidaire Pages: 4

Brand: Frigidaire Pages: 3

Brand: Frigidaire Pages: 5

Brand: Frigidaire Pages: 7

Brand: Frigidaire Pages: 5

Brand: Frigidaire Pages: 6

Brand: Frigidaire Pages: 12

Brand: Frigidaire Pages: 2

Brand: Frigidaire Pages: 2

Brand: Frigidaire Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands