©2006 Adventistsat.com
18
Optional: Universal Post
The Universal Post Mount can be assembled for
roof or wall type installations. The post has slots
for attaching to the Foot Plate on both ends of
the tube. This allows the dish to be mounted with
either a higher reach above a roof (as pictured)
or outward reach away from a wall when using
the slots on the opposite end of the post.
Mount the Universal Post Mount Foot Plate to a
wall stud or roof rafter using two 5/16th x 3” lag
bolts. Adding 5/16th x 2” lag bolts on the outer
edges will increase stability.
To prevent water leakage, use the
included silicone sealant or other
waterproofing product on all wall
or roof penetrations.
The unique slots in the post tube
allows the post to be leveled in almost
any installation position. Center the
bubble in the level then tighten the
4 flange bolts to secure the post. It is
very important to make sure that the
post is perfectly plumb (level on all
sides).
Level and Secure Post
Insert the Bubble Level into the top of the post. Be sure that it is
seated level with the top edge of the post.
