©2006 Adventistsat.com
30
Satellite receiver displays “No Signal” only during very hot or
cold weather.
LNBF is aging or is affected by temperature extremes.
Replace the LNBF.
Most of the channels have strong Signal Quality, but LLBN signal
quality is poor or the receiver displays “No Signal”.
LLBN has
a weaker signal than the other Adventist channels and may display
a low signal quality or no signal. Installations often need to be fine
tuned to receive this weaker station. Slight adjustments might need
to be made to the antenna elevation, azimuth and the LNBF rotation
and distance from the reflector to peak the quality.
I only receive either the TV or the Radio Channels.
How do I
switch between these services? Press the TV/Radio button on the
lower left corner of the remote control. This button toggles between
the TV and Radio services available.
Are more channels available?
Many more channels are often
available for viewing on this and other satellites. This receiver is
capable of automatically programming these additional TV and
Radio services. Many free national and international services
are available. Do this at your own risk, as AdventistSat will only
provide the warranty free technical support for the reception of the
AdventistSat programming.
Scanning the Satellite for Additional Channels (optional)
Press MENU on the remote, verify that the receiver is in the Installation Menu. If
not, CH/DOWN arrow to enter the Installation Menu.
Press OK and enter password 0000.
Press CH/DOWN to select Satellite Scan.
Press VOL/Right arrow to select FREE ONLY
Press CH/DOWN to select satellite name
Press VOL/Right arrow to select IA5 KU or AMC4 KU
Press ENTER button to begin the satellite scan. This process will take approximately
3 minutes.
After the Scanning is complete, press the ENTER button once to save and a second
time view or listen to the scanned channels.
Do not call to activate programming; all channels are free to air and available
with no monthly charge. The receiver assigns channel numbers while scanning;
therefore, no uniform channel line-up will be available after a scan is performed.
1.
2.
3.
4.
5.
6.
7.
8.
