Advantech TPC-300 Series, User Manual

Page: 78 / 88

TPC-300 Series/TPC-B510 User Manual 68

Wake System From S5
This item allows users to enable/disable system-wake-on alarm events.
Select FixedTime, system will wake on the hr:min:sec specified.
Select DynamicTime, system will wake on the current time + added minute(s).
C.1.2.8 USB Configuration

Legacy USB Support
This item allows users to enable/disable legacy USB support. The Auto option
disables legacy support if no USB devices are connected. The Disable option
reserves USB devices for EFI applications.

XHCI Hand-Off
This is a workaround for operating systems without XHCI hand-off support. The
XHCI ownership change should be conducted by the XHCI driver.

USB Mass Storage Driver Support
This item allows users to enable/disable USB mass storage driver support.

USB S5 Wakeup Support
This item allows users to enable/disable USB S5 wakeup support.

USB Transfer Time-Out
This item allows users to set the time-out value for Control, Bulk, and Interrupt
USB mass storage device transfers.

Device Reset Time-Out
This item allows users to set the device reset command time-out.

Device Power-Up Delay
This item allows users to Set the maximum time the device will take before
reporting itself to the Host Controller. The Auto option uses the default value,
which is 100 ms for a Root port. For a Hub port, the delay time is obtained from
the Hub descriptor.

USB Flash Disk 1100
Mass storage device emulation type. The Auto option emulates devices accord -
ing to media format. Optical drives are emulated as “CDROM” drives. No media
is emulated according to driver type.