SKY-8232D Manual V02 20220411
Copyright 2022 Advantech Co. Ltd. All rights reserved
Page 97
Figure 3-38: Removing the Disk Tray
4.
Install the 2.5
” drive with four screws contained in the disk screw kit. Keep the
screws loosely inserted into the threads until all four screws have been inserted.
Then, tighten the screws one after the other.
Figure 3-39: Mounting the Drive in the Disk Tray
5.
Insert the tray into the disk bay until the drive engages with the connector on the
HDD backplane. Now click the handle back to the tray.
3.3.5.2 M.2 SSD
Note!
You need:
- A PH2 screw driver
- A standard M.2 SSD
- 1 M.2 mounting screws (in the accessory box)
1. Remove the top cover, middle bar, and the PCIe cage
CG2
.
2. Make sure the M.2 SSD is compliant with the socket and that the mechanical keys
match.
3.
Insert the M.2 SSD with an angle of approximate 33° in the slot. Press the M.2
SSD downwards.
4.
Install and fasten the fixing screw.
5.
Reinstall the PCIe card cage
CG2
, middle bar and top cover.
