Advantech SKY-8232D User Manual Download Page 51

Page: 51 / 133

Page 51

2.4.14 Power Supplies

The SKY-8232D supports 1200W redundant AC and 800W redundant DC power
supplies. Technical specification for the power supply can be found in

Appendix C

2.4.14.1 AC PSU

Figure 2-17: AC PSU Details

Table 2-14: AC PSU Details

Item

Element

Description

PS1

Fan

PSU fan and air outlet area

PS2

Power
Connector

IEC 320 C-14 power connector

PS3

Lock

Lock for locking /unlocking the module. Pull left to unlock.

PS4

Status LED

Green LED indicating normal operation when lit.

Amber LED indicating abnormal operation when lit.

PS5

Handle

Handle for extraction / insertion

Caution!

1. DO NOT remove the PSU before unplugging the power cable (power cord).
2. For 1+1 redundant system power, only ONE PSU is allowed to be extracted

at one time.

3. DO NOT leave the slot empty when extracting the PSU, the alternative PSU

MUST be inserted immediately for safety purpose.

PS2

PS4

PS5

PS3

PS1

Summary of Contents for SKY-8232D
























































































































Search results

Summary of Contents for SKY-8232D

Reviews:

Related manuals for SKY-8232D

Brands by name

Popular brands

Advantech SKY-8232D, User Manual

Search results

Summary of Contents for SKY-8232D

Reviews:

Related manuals for SKY-8232D

Brands by name

Popular brands