Advantech PCM-5864, User Manual

Page: 46 / 141

34 PCM-5864/E/L User's Manual
2.18.6 LCD backlight signal setting (J8)
The backlight signal can either choose positive enable or negative
enable when using the J8 setting.
Table 2-20: LCD bac klight signal setting (J8)
Positive signal Negative signal
J8
Configuration of the VGA interface is done completely via the
software utility. You do not have to set any jumpers. Refer to
Chapter 3 for software setup details.
Refer to Chapter 3 for details on connecting the five standard
LCDs: Sharp LM64183P, LM64P89, Toshiba LTM10C042, Sharp
64C142, and Planar EL display.
2.19 Ethernet configuration
The PCM-5864/E/L is equipped with a high performance 32-bit
PCI-bus Ethernet interface which is fully compliant with IEEE
802.3U 10/100Mbps CSMA/CD standards. It is supported by all
major network operating systems.
The medium type can be configured via the RSET8139.EXE
program included on the utility disk. (See Chapter 3 for detailed
information.)
2.19.1 100Base-T connector (CN3)
100Base-T connects to the PCM-5864/E/L via an adapter cable to
a 10-pin polarized header (CN3). For 10Base-T RJ-45 operation,
an adapter cable converting CN3 into a standard RJ-45 jack is
required.
1
2
3
1
2
3