Advantech PCM-5864, User Manual

Page: 40 / 141

28 PCM-5864/E/L User's Manual
2.15 IR connector (CN17)
This connector supports the optional wireless infrared transmitting
and receiving module. This module mounts on the system case.
You must configure the setting through BIOS setup.
2.16 Audio interfaces (CN4, CN6, CN7,
CN502) (PCM-5864/E only)
The PCM-5864 is equipped with a high-quality audio interface,
which provides 16-bit CD-quality recording and playback as well
as OPL3 compatible FM music. It is supported by all major
operating systems, and is 100% Sound Blaster Pro compatible.
2.16.1 Audio connector (CN4)
The PCM-5864 provides all major audio signals on a 16-pin
flat-cable connector, CN4. These audio signals include
Microphone in (mono), Line in (stereo), Line out (stereo), and
Speaker out (stereo). If you use traditional telephone jack
connectors for these audio signals, you will need an adapter cable.
2.16.2 CD audio input connector (CN6)
Any CD-ROM drive can provide analog audio signal output when
used as a music CD player. The CN6 on PCM-5864 is a connector
to input CD audio signals into the audio controller. The audio
cable of your CD-ROM drive will be used to connect to CN6.
2.16.3 Aux line-in connector (CN7)
The CN7 Line in signal is the same as CN4. It is reserved for the
AV connector via a customized cable.
2.16.4 Speaker-out connector (CN502)
The CN502 Speaker out signal is the same as the CN4. It is
reserved for the AV connector via a customized cable.