Chapter 4 SVGA Setup 53
How To Use SVM From The Menu
1. Switch directory to “X:\TVGAUTIL\UTILITY” where X is the
drive where Disk 2 of the Trident Utility and DOS Application
drivers have been installed .
2. Type
SVM
to pull up the menu. You will see the following
screen:
The top bar shows the available color depths. Move through the
options with the right/left arrow keys.
The program provides all the different resolutions supported by the
chip under each color depth. These resolutions are traversed by the
up/down arrow keys.
The graphics adapter can be tested for each resolution/mode by first
highlighting the selection by use of the arrow keys, then pressing
the F5 key.
The graphics adapter can be run at a selected mode by first selecting
