28 PCA-6144V User's Manual
Boot Up System Speed
High
Sets the speed to high
Low
Sets the speed to low
IDE HDD Block Mode
Enabled Enable IDE HDD Block Mode. BIOS will detect the block size
of the HDD and send a block command automatically.
Disabled Disable IDE HDD Block Mode
Gate A20 option
Normal
The A20 signal is controlled by the keyboard controller or
chipset hardware
Fast
Default: Fast. The A20 signal is controlled by Port 92 or
chipset specific method.
Memory parity check
Enabled Normal memory parity check. If system DRAM has no parity
bit, the the system will display "RAM parity error".
Disabled Ignores memory parity check even if DRAM has no parity
bit. The the system will display "RAM parity error".
Typematic Rate setting
The typematic rate determines the characters per second accepted
by the computer. Typematic Rate setting enables or disables the
typematic rate.
Typematic Rate (Char/Sec)
BIOS accepts the following input values (character/second) for
Typematic Rate: 6, 8, 10, 12, 15, 20, 24, 30.
Typematic Delay (msec)
When holding down a key, the Typematic Delay is the time interval
between the appearance of the first and second characters. The
input values (msec) for this category are: 250, 500, 750, 1000.
