16 PCA-6144V User's Manual
The following table lists the connectors on the PCA-6144V. See
Chapter 1 for help locating the connectors.
Connectors
Label
Component
CN1
EIDE connector
CN2
PC/104 connector (8 bit)
CN3
PC/104 connector (16 bit)
CN4
Floppy connector
CN5
Keyboard & PS/2 mouse DIN connector
CN6
COM2 pin-header connector
CN7
Parallel port connector
CN8
VGA DB-15 connector
CN9
Power connector (+5 V, +12 V)
CN10
Power connector (-5 V, -12 V)
CN11
COM1 DB-9 connector
CN13
External speaker connector
CN14
Keyboard pin-header connector
CN15
Power LED and keylock
JP29
Reset
D2
HDD LED
The following sections tell how to make each connection. In most
cases, you will simply need to connect a standard cable.
Warning! Always completely disconnect the power cord
from your chassis whenever you are working on
it. Do not make connections while the power is
on. Sensitive electronic components can be
damaged by the sudden rush of power. Only
experienced electronics personnel should open
the PC chassis.
Caution!
Always ground yourself to remove any static
charge before touching the CPU card. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at
all times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis.
