Advantech PCA-6008VG, User Manual

Page: 51 / 96

37 PCA-6008VG User Manual
Chapter 3
A
ward
BIOS
Setup
3.7.14 PowerOn by Alarm
The Choice: “Enabled”,”Disabled”.
3.7.15 Primary IDE 0
When Enabled. the system will resume from suspend mode if Primary IDE 0 is active.
The Choice: “Enabled”,”Disabled”
3.8 PnP/PCI Configurations
Figure 3.10 PnP/PCI configurations screen
3.8.1 PNP OS Installed
Set this option to Yes if a PNP OP is installed on your system. The default value for
this setting in No.
3.8.2 Reset Configuration Data
Default is Disabled. Select Enable to reset Extended System Configuration Data
(ESCD) if you have installed a new add-on, and system configuration has caused
such a conflict that OS cannot boot.
3.8.3 Resources Controlled By
The commands here are "Auto(ESCD)" or “Manual.” Choosing “Manual” requires you
to choose resources from each following sub-menu. "Auto(ESCD)" automatically
configures all of the boot and Plug and Play devices, but you must be using Windows
95 or above.
3.8.4 PCI/VGA Palette Snoop
This is set to “Disabled” by default.