15
PCA-6008VG User Manual
Chapter 2
C
onnecting
Peripherals
2.7
Ethernet Connector (LAN1)
The PCA-6008 is equipped with a single high performance 1000 Base-T Ethernet
interface. The Gigabit Ethernet port uses the
Realtek RTL8111B
controller connected
to the PCI-Express x1 of the ICH6 I/O controller. The PCA-6008 is fully compliant
with IEEE 802.3ab 1000Base-T standards. It is supported by all major network oper-
ating systems and is 100% Novell NE-2000 compatible. An onboard RJ-45 jack pro-
vides convenient 10/100/1000Base-T RJ-45 operation.
2.8
Serial Ports (COM1, COM2)
The PCA-6008 offers up to two serial ports. These ports can connect to serial
devices, such as a mouse or a printer, or to a communications network.
The IRQ and address ranges for those ports are fixed. However, if you want to dis-
able the port or change these parameters later, you can do this in the system BIOS
setup.
Different devices implement the RS-232 standard in different ways. If you are having
problems with a serial device, be sure to check the pin assignments for the connec-
tor.
LAN1
COM1
COM2
Summary of Contents for PCA-6008VG
