Advantech PCA-6008VG, User Manual

Page: 41 / 96

27 PCA-6008VG User Manual
Chapter 3
A
ward
BIOS
Setup
3.4.2 Hard Disk Boot Priority
Set hard disk boot device priority.
3.4.3 Virus Warning
Enable virus warning, the commands are "Enabled" or "Disabled".
3.4.4 CPU L1 & L2 Cache
Enabling this feature speeds up memory access. The commands are “Enabled” or
“Disabled.”
3.4.5 Quick Power On Self Test
It allows the system to skip certain tests to speed up boot-up procedure.
3.4.6 First/Second/Third Boot Device
The BIOS tries to load the OS from the devices in the sequence set here. The options
are: "Floppy", "LS120", "HDD-0", "SCSI", "CDROM", "HDD-1", "HDD-2", "HDD-3",
"ZIP100", "USB-FDD", "USB-ZIP", "USBCDROM","USB-HDD", "LAN", "Disabled".
3.4.7 Boot Other Device
To boot another device, the options are "Enabled" and "Disabled".
3.4.8 Swap Floppy Drive
If the system has two floppy drives, choose "Enabled" to assign physical drive B to
logical drive A and vice-versa. The commands are “Enabled” or “Disabled.”
3.4.9 Boot Up Floppy Seek
Selection of the command “Disabled” will speed the boot up. Selection of “Enabled”
searches disk drives during boot up.
3.4.10 Boot Up NumLock Status
Set the boot up status Num Lock, the options are "On" and "Off".
3.4.11 Gate A20 Option
"Normal": A pin in the keyboard controller controls GateA20. Fast" (Default): Lets
chipset control GateA20.
3.4.12 Typematic Rate Setting
The typematic rate is the rate key strokes repeat as determined by the keyboard con-
troller. The commands are “Enabled” or “Disabled.” Enabling allows the typematic
rate and delay to be selected.
3.4.13 Typematic Rate (Chars/Sec)
BIOS accepts the following input values (characters/second) for typematic rate: 6, 8,
10, 12, 15, 20, 24, 30.