__________________________________________________________________________________________
PAC-4010 User Manual V1.0 Copyright 2016 Advantech Co. Ltd. All rights reserved. Page
49
Prerequisite:
Commercial mini-USB to USB cable (Advantech P/N: 1700018550)
CP2102 driver (needed to be installed on the terminal PC before using the console),
please download from
https://www.silabs.com/products/interface/usbtouart/Pages/default.aspx
3.4.2 COM2 (RJ45)
For a terminal PC to connect to the console function on the PAC-4010. Nowadays most
of laptop has no COM port, users can link to COM2 (RJ45) by connecting USB-to-DB9
(male type DB9) cable with RJ45-to-DB9 (female type DB9) cable. An additional driver
is needed for RJ45-to-DB9 cable.
Prerequisite:
RJ45 to DB9 cable (Advantech P/N: 1700002270)
3.4.3 Serial-over-LAN (SOL)
User may also establish the console via SOL function.
Prerequisite:
RJ45 Ethernet cable and IPMItool
Make sure the IP address of IPMC is configured in advance.
SOL example:
ipmitool -I lanplus -H <IP of ShMC or IPMC> -U administrator -P advantech sol activate
[SOL Session operational. Use ~? for help]
Note!
When SOL is used as the console terminal, please skip
Chapter 3.4.5 PuTTY Configuration.
3.4.4 Terminal Emulator
A terminal emulator application must be available on the terminal PC in order to access
the console screen. If your terminal PC runs on Microsoft Windows, a common
application that can act as a client for the SSH, Telnet, rlogin, and raw TCP protocols
called PuTTY can be installed and used. PuTTY was originally written for Microsoft
Windows; however, it has also been ported to various Unix-like operating systems. It is
available as open source software for download from the internet.
Summary of Contents for PAC-4010
Page 2: ......
