![background image](http://html1.mh-extra.com/html/advantech/lnc-m5800-series/lnc-m5800-series_operation-manual_2858258067.webp)
Milling Machine Series
CNC operations
62
Advantech-LNC Technology Co., Ltd.
For detailed instructions, please refer to section 1.8 for instructions on how to change Tool Length Offset Settings
2. Tool wear offset
Press the
【
Wear
】
key to enter tool wear offset page.
There are a total of 99 sets of settings available for tool wear offset, and
<PgUp>
and
<PgDn>
keys can be used to
switch the settings screen.
Use arrow keys to move the cursor to X-wear, Y-wear, Z-wear, and wear radius for the tool number you wish to
set up, enter a set value into the input area and press the
<Input>
key to enter the numerical value into the
controller. (This is an incremental setting)
Summary of Contents for LNC M5800 Series
